Skip to main content

Conas cealla a ghlasáil nó a chosaint tar éis sonraí a iontráil nó a ionchur in Excel?

Má tá bileog oibre agat agus nach gá ach sonraí áirithe a iontráil, agus tar éis duit sonraí a ionchur, ní mór duit na cealla a ghlasáil go huathoibríoch d’fhonn athruithe a chosc arís. Conas is féidir leat a dhéanamh chun é a bhaint amach? Is féidir leis an alt seo cabhrú leat.

Cealla a ghlasáil nó a chosaint tar éis sonraí a iontráil nó a ionchur le cód VBA


Cealla a ghlasáil nó a chosaint tar éis sonraí a iontráil nó a ionchur le cód VBA

Mar shampla, is é A1: F8 an raon áirithe cealla bána. Déan mar a leanas le do thoil chun na cealla seo a ghlasáil tar éis sonraí a iontráil in Excel.

1. Díghlasáil an raon seo ar dtús, roghnaigh na cealla agus deaschliceáil, ansin roghnaigh Cealla Formáid sa roghchlár cliceáil ar dheis, agus sa Cealla Formáid bosca dialóige, gan an Faoi Ghlas bosca faoin cosaint cluaisín, agus ar deireadh cliceáil ar an OK cnaipe. Féach an pictiúr:

2. cliceáil Athbhreithniú > Bileog Cosanta. Agus sonraigh pasfhocal chun an bhileog oibre seo a chosaint.

3. Cliceáil ar dheis ar an táb bileog, roghnaigh Féach an cód ón roghchlár cliceáil ar dheis. Ansin cóipeáil agus greamaigh an cód VBA thíos i bhfuinneog an Chóid. Féach an pictiúr:

Cód VBA: Glasáil nó cosaint cealla tar éis sonraí a iontráil nó a ionchur

Dim mRg As Range
Dim mStr As String

Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
If Not Intersect(Range("A1:F8"), Target) Is Nothing Then
    Set mRg = Target.Item(1)
    mStr = mRg.Value
End If
End Sub
Private Sub Worksheet_Change(ByVal Target As Range)
    Dim xRg As Range
    On Error Resume Next
    Set xRg = Intersect(Range("A1:F8"), Target)
    If xRg Is Nothing Then Exit Sub
    Target.Worksheet.Unprotect Password:="123"
    If xRg.Value <> mStr Then xRg.Locked = True
    Target.Worksheet.Protect Password:="123" 
End Sub
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Not Intersect(Range("A1:F8"), Target) Is Nothing Then
    Set mRg = Target.Item(1)
     mStr = mRg.Value
End If
End Sub

nótaí: Sa chód, is é “A1: F8” an raon a theastaíonn uait sonraí a ionchur; agus is é “123” pasfhocal na bileoige cosanta seo. Athraigh iad de réir mar is gá duit.

4. Brúigh Eile + Q eochracha ag an am céanna chun an Microsoft Visual Basic d’Fheidhmchláir fhuinneog.

Tar éis dóibh sonraí a iontráil i gcealla raon A1: F8, cuirfear faoi ghlas iad go huathoibríoch. Agus gheobhaidh tú bosca dialóige pras má dhéanann tú iarracht aon ábhar cille den raon seo a athrú. Féach an pictiúr:


Earraí gaolmhara:

Uirlisí Táirgiúlachta Oifige is Fearr

🤖 Kutools AI Aide: anailís sonraí a réabhlóidiú bunaithe ar: Forghníomhú Chliste   |  Gin Cód  |  Cruthaigh Foirmlí Saincheaptha  |  Anailís a dhéanamh ar Sonraí agus Cairteacha a Ghin  |  Feidhmeanna Kutools a agairt...
Gnéithe Coitianta: Faigh, Aibhsigh nó Aithnigh Dúblaigh   |  Scrios Sraitheanna Bána   |  Comhcheangail Colúin nó Cealla gan Sonraí a Chailleadh   |   Babhta gan Foirmle ...
Cuardaigh Super: Ilchritéir VLookup    VLookup Illuachanna  |   VLookup Trasna Ilbhileoga   |   Amharc doiléir ....
Liosta anuas Casta: Go tapa Cruthaigh Liosta Anuas   |  Liosta anuas Cleithiúnach   |  Liosta Buail Isteach Ilroghnacha ....
Bainisteoir Colún: Cuir Líon Sonrach Colún leis  |  Colúin Bog  |  Scoránaigh Stádas Infheictheachta na gColún Ceilte  |  Déan comparáid idir Raonta & Colúin ...
Gnéithe Réadmhaoin: Fócas Eangaí   |  Amharc Dearaidh   |   Barra Mór na Foirmle    Leabhar Oibre & Bainisteoir Bileog   |  Leabharlann Acmhainní (Uaththéacs)   |  Piocálaí Dáta   |  Comhcheangail Bileoga Oibre   |  Criptigh/Díchriptigh Cealla    Seol Ríomhphost trí Liosta   |  Scagaire Super   |   Scagaire Speisialta (scagaire trom/iodálach/stailc tríd...) ...
Barr 15 Uirlisí12 Téacs uirlisí (Cuir Téacs, Bain Carachtair,...)   |   50 + Cairt cineálacha (Cairt Gantt,...)   |   40+ Praiticiúil Foirmlí (Ríomh aois bunaithe ar lá breithe,...)   |   19 Insertion uirlisí (Cuir isteach Cód QR, Ionsáigh Pictiúr ón gCosán,...)   |   12 Tiontú uirlisí (Uimhreacha le Focail, Comhshó Airgeadra,...)   |   7 Cumaisc & Scoilt uirlisí (Sraitheanna Comhcheangail Casta, Cealla Scoilt,...)   |   ... agus eile

Supercharge Do Scileanna Excel le Kutools le haghaidh Excel, agus Éifeachtúlacht Taithí Cosúil Ná Roimhe. Kutools le haghaidh Excel Tairiscintí Níos mó ná 300 Ardghnéithe chun Táirgiúlacht a Treisiú agus Sábháil Am.  Cliceáil anseo chun an ghné is mó a theastaíonn uait a fháil ...

Tuairisc


Tugann Tab Oifige comhéadan Tabbed chuig Office, agus Déan Do Obair i bhfad Níos Éasca

  • Cumasaigh eagarthóireacht agus léamh tabbed i Word, Excel, PowerPoint, Foilsitheoir, Rochtain, Visio agus Tionscadal.
  • Oscail agus cruthaigh cáipéisí iolracha i gcluaisíní nua den fhuinneog chéanna, seachas i bhfuinneoga nua.
  • Méadaíonn do tháirgiúlacht 50%, agus laghdaíonn sé na céadta cad a tharlaíonn nuair luch duit gach lá!
Comments (75)
Rated 5 out of 5 · 1 ratings
This comment was minimized by the moderator on the site
Good day, what I want to do is quite similar to the presented code however, the code only caters for individual data entry. My case is that I have a data entry interface but the given code doesn't follow the formulas before the selected cells which is substantial in my situation. Please, help me to resolve this. Thank you so much :D
This comment was minimized by the moderator on the site
I want to lock a particular range after an entry and allow only one entry in that range.
the range already contains a data validation.
This comment was minimized by the moderator on the site
Hi Rakesh Chand,
Assuming the specific range is A1:D7, when you select an entry in any data validation of that range, the worksheet will be protected.
Please apply the following VBA code to get it done.

Private Sub Worksheet_Change(ByVal Target As Range)
'Updated by Extendoffice 20220831
    Dim xRg As Range
    Dim Rg As Range
    On Error Resume Next
    Set Rg = Range("A1:D7")
    Set xRg = Intersect(Rg, Target)
    If xRg Is Nothing Then Exit Sub
       
    Rg.Locked = True
    
        Rg.Worksheet.Protect Password:="123"
    
End Sub
This comment was minimized by the moderator on the site
доброго времени суток!
Возможно ли с помощью кода сделать следующие?
Есть таблица, к примеру 6 столбцов, в которую последовательно вносят данные в 5 столбов (присутствует режим "выбор из списка данных" и формулы), а в 6-ом выбирается фамилия вносившего. Возможно ли блокировать полностью строку с внесенными данными, только после заполнения последней ячейке в этой строке (6-ой столбец)?
Выше указанный способ блокирует ввод данных в ячейки где есть выбор из списка данных на всём листе.
Если есть такой вариант, буду очень признателен за код.
Заранее Спасибо!
Rated 5 out of 5
This comment was minimized by the moderator on the site
Hi I am having an error with the deletion. Whenever I tried to click the delete the record a pop up will say "Microsoft Excel will permanently delete this sheet. Do you want to continue'.

Here's the code that I am using:

Sub Deletion()

Dim iRow As Long
Dim iSerial As Long


iSerial = Application.InputBox("Please enter Serial No. to delete the record.", "Delete", , , , , , 1)

On Error Resume Next

iRow = Application.WorksheetFunction.IfError _
(Application.WorksheetFunction.Match(iSerial, Sheets("Database").Range("A:A"), 0), 0)

On Error GoTo 0

If iRow = 0 Then

MsgBox "No record found.", vbOKOnly + vbCritical, "No Record"
Exit Sub

End If

Sheets("Database").Cells(iRow, 1).EntireRow.Delete Shift:=xlUp

End Sub


Please help me fix it. Thanks!
This comment was minimized by the moderator on the site
Hi guys. I need help and I'm new with VBA.
Say, I have Column BH with dropdown choices for Confirmed, Pending, and Cancelled.
All columns must remain unlocked for editing except for Columns A, BD, BE, and BF which must remain lock all the time.
If "Confirmed" is selected on Column BH, I want to lock the entire row before/next to it. Then, a password must be used if I want to edit the "Confirmed" row.
Can someone help me with this please?
Thanks in advance.

This comment was minimized by the moderator on the site
Good day...
Your tutorial is great!
I ran across a Run-Time error '13': during selection change if I select entire row. What is the turn-around for this? Any insight is much appreciated.
This comment was minimized by the moderator on the site
Hi,Which Excel version are you using?
This comment was minimized by the moderator on the site
Hi, This is all new to me. The formula is great. I want to lock cells D6:D36, H6:H35 & L6:L35 but can't get this to work. any help would be greatly appreciated.
This comment was minimized by the moderator on the site
Hi simon,If you want to lock cells in D6:D36, H6:H35 and L6:L35 separately after finish entering data in each range. Please do as follows.1. Select these three ranges by holding the Ctrl key;2. Do as the post described in step 1 to unlock these three ranges;3. Protect your worksheet with a password (Here my password is 123. This password will be used in the below code);4. Right click the sheet tab and then paste the below VBA code into the Code editor, and then press Alt + Q keys to close the Microsoft Visual Basic for Applications window.Notes: 1) In the code, you can change the ranges and password as you need;2)After pressing Alt + Q keys to close the code window, you need to shift to another worksheet and then go back to current sheet to make the code work. Otherwise, error will be occurred.<div data-tag="code">Dim mRg As Range
'Updated by Extendoffice 20201030
Dim mStr As String
Dim mStrAddress As String
Dim mArr
Private Sub Worksheet_Activate()
On Error Resume Next
Erase mArr()
mStrAddress = "D6:D36,H6:H35,L6:L35"
mArr = Split(mStrAddress, ",")
End Sub

Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
Dim xI As Integer
For xI = 0 To UBound(mArr)
If Not Intersect(Range(mArr(xI)), Target) Is Nothing Then
Set mRg = Target.Item(1)
mStr = mRg.Value
Exit For
End If
Next
End Sub
Private Sub Worksheet_Change(ByVal Target As Range)
Dim xRg As Range
Dim xI As Integer
On Error Resume Next
For xI = 0 To UBound(mArr)
Set xRg = Null
Set xRg = Intersect(Range(mArr(xI)), Target)
If Not (xRg Is Nothing) Then
Target.Worksheet.Unprotect Password:="123"
If xRg.Value <> mStr Then xRg.Locked = True
Target.Worksheet.Protect Password:="123"

End If
Next
End Sub
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim xI As Integer
On Error Resume Next
For xI = 0 To UBound(mArr)
If Not Intersect(Range(mArr(xI)), Target) Is Nothing Then
Set mRg = Target.Item(1)
mStr = mRg.Value
End If
Next
End Sub
This comment was minimized by the moderator on the site
If Not Intersect(Range("CUSTOMER!"), Target) Is Nothing Then
I got an error. I want to protect the whole sheet
This comment was minimized by the moderator on the site
Good afternoon ... thank you again for this great resource. I do have one question. We have a shared document that is used by multiple users for input purposes. We have noticed that if User A enters data in a given cell, User A cannot edit per the code above (which is exactly what we want) but User B who the document is also shared with can delete the data that User A entered. Is there a revision for the code above that could be included in a shared document that has multiple users that are entering data.
This comment was minimized by the moderator on the site
Hi
I want to auto lock cell while i'm saving my worksheet
Can you help me how to do this in vba
There are no comments posted here yet
Load More
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations