Skip to main content

Conas ríomhphost athfhillteach sceidil a sheoladh in Outlook?

I Microsoft Outlook, is féidir leat sceideal, cruinniú nó tasc athfhillteach a sheoladh chuig daoine eile go héasca. Ach mura dteastaíonn uait ach ríomhphost athfhillteach sceidil a sheoladh gan aon choinne, cruinniú nó tasc, conas is féidir leat a dhéanamh? Ar an drochuair, ní sholáthraíonn Outlook aon ghné chun ríomhphost athfhillteach sceidil a sheoladh, ach inár rang teagaisc, taispeánfaimid duit conas ríomhphost athfhillteach sceidil a sheoladh in Outlook.

Seol r-phost athfhillteach sceidil in Outlook le cód VBA

Seol ríomhphoist athfhillteach sceidil go héasca in Outlook le huirlis iontach


Seol r-phost athfhillteach sceidil in Outlook le cód VBA

Tá an rang teagaisc seo roinnte ina cheithre chuid, éireoidh leat ríomhphost athfhillteach sceidil a sheoladh tar éis na codanna seo a chríochnú. Déan mar a leanas le do thoil.

Cuid 1: Cruthaigh coinne nua

1. Téigh chuig an féilire amharc trí chliceáil féilire sa Nascleanúint Pane, agus ansin coinne nua a chruthú trí chliceáil Ceapachán Nua faoi Baile Tab.

3. Sa Ceapachán dialóg faoi Ceapachán cluaisín. Tá ort:

A: Cineál sa ábhar B: Cuir isteach seoltaí ríomhphoist na bhfaighteoirí sa An Cheantar
C: Cumraigh an Am tosaithe agus an Am deiridh D: Roghnaigh an meabhrúchán faoin Meabhrúchán liosta anuas.
Má roghnaíonn tú 15 nóiméad, ciallaíonn sé go gcuirfidh sé 15 nóiméad i gcuimhne duit go luath nuair a sheolfar an ríomhphost.
E: Cum do chorp Ceapacháin.

nótaí: An Ábhar Ceapacháin beidh sé ina ábhar ríomhphoist athfhillteach; agus an Comhlacht ceapacháin beidh sé ar an gcomhlacht ríomhphoist athfhillteach nuair a gheobhaidh na faighteoirí an ríomhphost.

Cuid 2: Cruthaigh catagóir nua

Anois ní mór duit catagóir nua a chruthú darb ainm “Seol Ríomhphost Athfhillteach Sceideal”Mar a leanas:

1. Sa Ceapachán dialóg, cliceáil le do thoil Catagóiriú > Gach Catagóirí sa Clibeanna grúpa faoi Ceapachán Tab.

2. Nuair a bheidh an Catagóirí Datha dialóg ag pop suas, cliceáil le do thoil Nua cnaipe. Sa Cuir Catagóir Nua leis dialóg, cineál “Seol Ríomhphost Athfhillteach Sceideal"Sa Ainm Gort; agus ansin roghnaigh dath sa dath liosta anuas. Ansin cliceáil OK.

3. Ansin feicfidh tú an “Seol Ríomhphost Athfhillteach SceidealTá an chatagóir liostaithe, féach an bosca le do thoil, agus ansin cliceáil OK cnaipe.

Cuid 3: Socraigh an Atarlú

Anois, tá sé in am atarlú an cheapacháin a shocrú.

1. cliceáil Atarlú sa Roghanna grúpa faoi Ceapachán cluaisín. Féach an pictiúr:

2. Sa Atarlú Ceapacháin dialóg, cumraigh do Atarlú patrún. Má theastaíonn am deiridh uait, cumraigh é le do thoil Raon atarlú. Agus ansin cliceáil OK.

3. Nuair a fhillfidh sé ar an Ceapachán dialóg, cliceáil le do thoil Sábháil & Dún cnaipe. Féach an pictiúr:

Cuid 4: Úsáid an cód VBA chun an R-phost Athfhillteach Sceideal a sheoladh

1. Brúigh le do thoil Eile + F11 a oscailt Microsoft Visual Basic d’Fheidhmchláir dialóg.

2. Cliceáil faoi dhó ar Project1 > Microsoft Outlook Object > ThisOutlookSession sa phána chlé. Féach an pictiúr:

3. Cóipeáil agus greamaigh an cód VBA seo a leanas chuig eagarthóir VBA. Agus ansin cliceáil Sábháil cnaipe.

VBA: ríomhphost athfhillteach sceidil a sheoladh

Private Sub Application_Reminder(ByVal Item As Object)
'Updated by Extendoffice 20200522
Dim xMailItem As MailItem
Dim xItemDoc As Word.Document
Dim xNewDoc As Word.Document
Dim xFldPath As String
On Error Resume Next
If Item.Class <> OlObjectClass.olAppointment Then Exit Sub
If Item.Categories <> "Send Schedule Recurring Email" Then Exit Sub
Set xMailItem = Outlook.Application.CreateItem(olMailItem)
Set xItemDoc = Item.GetInspector.WordEditor
xFldPath = CStr(Environ("USERPROFILE"))
xFldPath = xFldPath & "\MyReminder"
If Dir(xFldPath, vbDirectory) = "" Then
    MkDir xFldPath
End If
xFldPath = xFldPath & "\AppointmentBody.xml"
xItemDoc.SaveAs2 xFldPath, wdFormatXMLDocument ' wdFormatXML
Set xNewDoc = xMailItem.GetInspector.WordEditor
VBA.DoEvents
xNewDoc.Application.Selection.HomeKey
xNewDoc.Activate
xNewDoc.Application.Selection.InsertFile FileName:=xFldPath, Attachment:=False
With xMailItem
    .To = Item.Location
    .Recipients.ResolveAll
    .Subject = Item.Subject
    .Send
End With
Set xMailItem = Nothing
VBA.Kill xFldPath
End Sub

4. cliceáil uirlisí > tagairtí a oscailt tagairtí - Tionscadal dialóg. Sa dialóg, seiceáil an Leabharlann Réada Microsoft Word rogha agus cliceáil ar an OK cnaipe.

5. Brúigh an Eile + Q eochracha ag an am céanna chun an Microsoft Visual Basic d’Fheidhmchláir fhuinneog.

Nuair a bheidh an Meabhrúchán ag popadh suas, seolfar an ríomhphost go huathoibríoch chuig na faighteoirí a chlóscríobh tú sa réimse Suíomh sa chéad chuid. Ansin cliceáil Ruaig sa Meabhrúchán dialóg. Agus seolfar an ríomhphost athfhillteach gach lá san am seo. Féach an pictiúr:

nótaí: Rinneadh tástáil rathúil ar an gcód VBA in Outlook 2010 agus sna leaganacha níos déanaí.


Seol ríomhphoist athfhillteach sceidil go héasca in Outlook le huirlis iontach

I gcás go leor úsáideoirí Outlook, tá an modh thuas ró-tedious le láimhseáil i gceart. Seo a mholadh go mór an Sceideal seolta uathoibríoch gné de Kutools le haghaidh Outlook. Leis an ngné seo, is féidir leat ríomhphoist iomadúla athfhillteacha a chruthú go héasca, agus na ríomhphoist seo a sceidealú le seoladh go rialta ag eatraimh laethúla, seachtainiúla, míosúla nó bliantúla de réir mar is gá duit. Déan mar a leanas le do thoil chun é a chur i gcrích.

Téigh go dtí íoslódáil Kutools for Outlook agus bain triail as.

1. cliceáil Kutools > Sceideal seolta uathoibríoch > Cruthaigh sceideal seolta uathoibríoch.

2. Ansin tá fuinneog teachtaireachta ag oscailt, agus ní mór duit:

2.1) Roghnaigh na faighteoirí ríomhphoist sa Chuig, Cc or Bcc réimsí de réir mar is gá duit, agus ansin líon isteach an ríomhphost ábhar;
2.2) Cum an comhlacht ríomhphoist;
2.3) Cliceáil Atarlú faoi ​​na Kutools Athfhillteach cluaisín. Féach an pictiúr:

3. Anois an R-phost Athfhillteach bosca dialóige aníos, ní mór duit an am athfhillteach, patrún athfhillteach agus an raon atarlú don ríomhphost, agus ansin cliceáil ar an OK cnaipe.

4. Anois filleann sé ar fhuinneog na teachtaireachta, cliceáil Sábháil & Dún cnaipe chun na socruithe athfhillteacha a shábháil agus an fhuinneog a dhúnadh.

Leid: Féadfaidh tú an chéim 1 go 4 thuas a athdhéanamh chun iliomad ríomhphoist athfhillteach a chruthú de réir mar is gá duit.

5. Anois cas ar an ngné trí chliceáil Kutools > Sceideal seolta uathoibríoch > Cumasaigh.

6. San oscailt Kutools le haghaidh Outlook dialóg, cliceáil OK.

Tar éis na socruithe thuas a chríochnú, seolfar na ríomhphoist athfhillteacha go huathoibríoch nuair a bheidh an dáta agus an t-am sonraithe ag teacht.

Nóta: Is féidir leat do ríomhphoist athfhillteach a bhainistiú go héasca mar seo a leanas.

1. cliceáil Kutools > Sceideal seolta uathoibríoch > Bainistigh sceideal seolta uathoibríoch.

2. Sa Bainistigh sceideal seolta uathoibríoch fhuinneog, is féidir leat a chruthú nua r-phost athfhillteach, eagar, scriosadh, cas ar or amach r-phost athfhillteach atá ann cheana de réir mar is gá duit. Nó is féidir leat cliceáil ar an Logáil íocón chun féachaint ar stair seolta na ríomhphoist athfhillteach.

Cliceáil chun níos mó eolais a fháil faoin ngné seo.

  Kutools le haghaidh Outlook Cuimsíonn 100+ gné chumhachtach do Microsoft Outlook. Saor chun triail a dhéanamh gan aon teorannú i 60 lá. Íosluchtaigh anois!


Uirlisí Táirgiúlachta Oifige is Fearr

Kutools le haghaidh Outlook - Níos mó ná 100 Gnéithe cumhachtacha chun do Outlook a shárú

🤖 Cúntóir Ríomhphoist AI: Ríomhphoist pro toirt le draíocht AI - aon-cliceáil chun freagraí genius, ton foirfe, máistreacht ilteangach. Trasfhoirmigh ríomhphost gan stró! ...

📧 Uathoibriú Ríomhphoist: As Oifig (Ar fáil do POP agus IMAP)  /  Sceideal Seol Ríomhphoist  /  Auto CC/BCC de réir Rialacha Agus Ríomhphost á Sheoladh  /  Auto Ar Aghaidh (Ardrialacha)   /  Beannacht Auto Cuir leis   /  Scoilt Ríomhphoist Ilfhaighteoirí go huathoibríoch i dTeachtaireachtaí Aonair ...

📨 Bainistíocht Ríomhphost: Ríomhphoist a Athghairm go héasca  /  Bloc Ríomhphoist Scam ag Ábhair agus Daoine Eile  /  Scrios Ríomhphoist Dúblacha  /  Cuardach Casta  /  Comhdhlúthaigh Fillteáin ...

📁 Ceangaltáin ProSábháil Baisc  /  Baisc Dícheangail  /  Comhbhrú Baisc  /  Auto Sábháil   /  Auto Dícheangail  /  Comhbhrúite Auto ...

🌟 Draíocht Chomhéadain: 😊Níos mó Emojis Pretty and Cool   /  Treisiú Do Tháirgiúlacht Outlook le Radhairc Tabbed  /  Íoslaghdaigh Outlook In ionad Deiridh ...

???? Wonders aon-cliceáil: Freagair Gach Duine le Ceangaltáin Isteach  /   Ríomhphoist Frith-Iascaireachta  /  🕘 Taispeáin Crios Ama an tSeoltóra ...

👩🏼‍🤝‍👩🏻 Teagmhálaithe & Féilire: Baisc Cuir Teagmhálacha Ó Ríomhphoist Roghnaithe  /  Roinn Grúpa Teagmhála ar Ghrúpaí Aonair  /  Bain Meabhrúcháin Breithlá ...

Thar Gnéithe 100 Fan le do Thaiscéalaíocht! Cliceáil Anseo le Tuilleadh Amach.

 

 

Comments (171)
No ratings yet. Be the first to rate!
This comment was minimized by the moderator on the site
Bonjour,
J'utilise outlook depuis peu, et j'ai découvert cette manipulation pour envoyer un mail récurrent. Cela a très bien fonctionné la première fois, mais je ne comprends pas, ça ne fonctionne plus. Cela a peut-être de l'importance, mais comme je travaille sur 2 ordinateurs différents, le code VBA a aussi été intégré sur ma deuxième session outlook. Auriez-vous une explication je vous prie ?
Merci d'avance
This comment was minimized by the moderator on the site
Hi Pink,
Which Outlook version are you using? Is there a reminder dialog box popping up afterwards?
This comment was minimized by the moderator on the site
This feature does not work for me no matter what I do and from the above thread, it doesn't look like they are attempting to fix it much less address it--I don't see any responses from the developer.

It's too bad because everything else with this product works very well.
This comment was minimized by the moderator on the site
Hi Rhonda Corn,
Can you provide the emails under the following folder path?
You can compress it and send it to
C:\Users\User Name\AppData\Roaming\ExtendOffice\OutlookKutools\KTORecurringEmail
This comment was minimized by the moderator on the site
How do I get this to run 2 different scheduled emails?
This comment was minimized by the moderator on the site
Hi, 
When I put recipients names into "location" it changes "appointment" to "meeting" invite, is this working as intended? It doesn't allow me to "save and close", but rather "send" the invite now which is not what I want to do.
This comment was minimized by the moderator on the site
Hi,Appointments are not changed to meetings when entering content into the Location field. 
This comment was minimized by the moderator on the site
I scheduled the reoccurring email however instead of sending email on the 30th it sent it today. I checked the settings and is set to send email on 30th at 10 am. Instead it sent the email on the 17th at 5:45 PM
This comment was minimized by the moderator on the site
Hi Leah,Sorry for the trouble, the problem you described cannot be reproduced. Here suggest using the relevant function of KTO to send a schedule recurring email.
This comment was minimized by the moderator on the site
I’m trying to set up a recurring email to be sent. However, it’s not working for some reason. It acts like it’s trying, but I get this error message:
This comment was minimized by the moderator on the site
Hi,You need to enable the Microsoft Word Object Library mentioned in step 4 of the post to avoid this error.
This comment was minimized by the moderator on the site
It is enabled
This comment was minimized by the moderator on the site
It is enabled already
This comment was minimized by the moderator on the site
I had the same problem.  I had a look in the available references list and found a second Microsoft Word 16.0 Object Library that was not enabled. Once I enabled that one, it solved the problem for me!
This comment was minimized by the moderator on the site
Hello, 
Several errors to easily solve if the mail stays in "draft" : 
-> Add .Save juste before .Send
-> Don't close everything too fast or the script wouldn't have the time to send the mail that it has been cleaned... so find a way to delay those 2 rows 
Set xMailItem = Nothing
VBA.Kill xFldPath
Maybe with a thread sleep/wait ? Is the killing mandatory ? wouldn't this be killed when outlook is closed ? For my usecase, it was ok to remove them
This comment was minimized by the moderator on the site
I followed the instruction in this article "How to send a schedule recurring email in Outlook" multiple times, to no avail. I get the popup reminder box but, the e-mail is never sent. I've tried with Kutools for Outlook installed and uninstalled. Still no success in sending a scheduled recurring email in Outlook.

Thanx,
RLB
This comment was minimized by the moderator on the site
I have had the same situation. It was working fine for almost a year and then suddenly stopped working. I've tried recopying the code, delete it completely and start over. Same results- popup reminder box happens, I click ok, and the email is never sent.
This comment was minimized by the moderator on the site
Hi tarnold,Make sure that the category name you created in step 2 is the same as the name specified in the code.
Can you try the VBA below and give me feedback on error you encountered later? Because this problem needs to be reproduced in my case. Or you can also try the third party tool mentioned in the post. Sorry for the inconvenience.

<div data-tag="code">Private Sub Application_Reminder(ByVal Item As Object)
'Updated by Extendoffice 20220114
Dim xMailItem As MailItem
Dim xItemDoc As Word.Document
Dim xNewDoc As Word.Document
Dim xFldPath As String
If Item.Class <> OlObjectClass.olAppointment Then Exit Sub
If Item.Categories <> "Send Schedule Recurring Email" Then Exit Sub
Set xMailItem = Outlook.Application.CreateItem(olMailItem)
Set xItemDoc = Item.GetInspector.WordEditor
xFldPath = CStr(Environ("USERPROFILE"))
xFldPath = xFldPath & "\MyReminder"
If Dir(xFldPath, vbDirectory) = "" Then
MkDir xFldPath
End If
xFldPath = xFldPath & "\AppointmentBody.xml"
xItemDoc.SaveAs2 xFldPath, wdFormatXMLDocument ' wdFormatXML
Set xNewDoc = xMailItem.GetInspector.WordEditor
VBA.DoEvents
xNewDoc.Application.Selection.HomeKey
xNewDoc.Activate
xNewDoc.Application.Selection.InsertFile FileName:=xFldPath, Attachment:=False
With xMailItem
.To = Item.Location
.Recipients.ResolveAll
.Subject = Item.Subject
.Send
End With
Set xMailItem = Nothing
VBA.Kill xFldPath
End Sub
This comment was minimized by the moderator on the site
Crystal,
Sorry for the delay.  I copied your script into VBA.  My category is "Recurring Email", so I made it match in your script.  I set up a recurring email to test it.  The reminder window pops up at the correct time.  I waited a couple of minutes and then clicked 'dismiss'.  The window closes.  No errors.  No email sent.
This comment was minimized by the moderator on the site
Hi Crystal, when using the code above I have this error: 
Erreur de compilation: Type défini par l'utilisateur non défini
it's concerning this lineDim xItemDoc As Word.Document

any ideas?
This comment was minimized by the moderator on the site
Hi Marie-Eve Noel,You need to enable the Microsoft Word Object Library mentioned in step 4 of the post to avoid this error.
This comment was minimized by the moderator on the site
At least yours work for a while. Mine never worked. Contacted Support and was told to post here. I suppose we'll have to wait on the author to respond.
This comment was minimized by the moderator on the site
Hi RodmanB,
Can neither of the two methods described in the article solve the problem?
VBA code and Kutools for Outlook are two different ways to handle the task.I need to know more specific about your issue, such as your Excel version.
This comment was minimized by the moderator on the site
Hi Crystal,
I am using MSOffice 365 for all of the Office products- Outlook, Excel, etc. As I posted 6month ago, it was working fine with my previous MSOffice desktop software.  When I switched to Office 365, it stopped working and I am having the same/similar situation as RodmanB.  The reminder popup occurs, I dismiss it and nothing happens.  The email is not in the draft folder, not in the sent folder, nothing.
This comment was minimized by the moderator on the site
Crystal,   Thanks for help. I replaced the VBCode and made a different test email. It preformed just as the other; reminder pops up, .wav file plays but the email is not sent. I'll install Kutools for Outlook and try that way tomorrow and, will respond with results.
This comment was minimized by the moderator on the site
Crystal,   Unable to install Kutool for outlook, demo license expired. Not willing to buy  just to debug this feature. So, have a great day and thanks for the help.
Thanx,RLB
This comment was minimized by the moderator on the site
Hi have implemented this and there's a couple of issues.1 - if i don't have Outlook opened, the email is not sent --> i guess this is normal, not a big deal anyway.2 - even the appointment appears just once a day and the email sent properly then, i see that the email is sent randomly other extra times during the day. For example, my schedule is daily at 9:00 and this is sent at 9:00 (OK) and also at 17:13 (NOK). I am not being able to identify why, any idea?
thanks.
This comment was minimized by the moderator on the site
What would the VBA code be for this but sending from the recipients of the appointment, not the "location" of the appointment as coded above? I need to send to 20+ people and cannot add enough names as the location fields is limited on characters. Many thanks
This comment was minimized by the moderator on the site
Hi J,You can try the second method "the Schedule auto send feature of Kutools for Outlook" mentioned in the post.
There are no comments posted here yet
Load More
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations