Skip to main content

Conas an stampa ama reatha a chur isteach nuair a athraíonn sonraí i gcill eile in Excel?

Údar: Siluvia Athraithe Deiridh: 2020-06-16

Má ghlactar leis go bhfaigheann tú bileog oibre a theastaíonn uait sonraí a mhodhnú i gcolún áirithe. Agus tar éis duit an bhileog oibre a mhodhnú, ní mór duit an stampa ama modhnaithe a chur isteach chun a chur in iúl do dhaoine eile cé na cealla a athraíodh. Conas déileáil leis? Taispeánfaidh an t-alt seo modh duit chun an stampa ama reatha a chur isteach nuair a athraíonn sonraí i gcill eile in Excel mar a thaispeántar thíos an pictiúr.

Cuir an stampa ama reatha isteach nuair a athraíonn sonraí i gcill eile le cód VBA

Cuir an stampa ama reatha isteach nuair a athraíonn sonraí i gcill eile le cód VBA

Mar a thaispeántar thíos an pictiúr, ní mór duit an stampa ama a chur i gcolún E má athraítear na cealla comhfhreagracha i gcolún C. Déan mar a leanas le do thoil.

1. Sa bhileog oibre is gá duit a mhodhnú agus a mharcáil le stampa ama, cliceáil ar dheis ar an táb bileog agus ansin cliceáil Féach an cód ón roghchlár cliceáil ar dheis.

2. Ansin cóipeáil agus greamaigh an cód VBA thíos sa cód fuinneog an Microsoft Visual Basic d’Fheidhmchláir fuinneog. Féach an pictiúr:

Cód VBA: Cuir isteach an stampa ama reatha nuair a athraíonn sonraí i gcill eile

Private Sub Worksheet_Change(ByVal Target As Range)
'Updated by Extendoffice 20180830
Dim xCellColumn As Integer
Dim xTimeColumn As Integer
Dim xRow, xCol As Integer
Dim xDPRg, xRg As Range
xCellColumn = 3
xTimeColumn = 5
xRow = Target.Row
xCol = Target.Column
If Target.Text <> "" Then
    If xCol = xCellColumn Then
       Cells(xRow, xTimeColumn) = Now()
    Else
        On Error Resume Next
        Set xDPRg = Target.Dependents
        For Each xRg In xDPRg
            If xRg.Column = xCellColumn Then
                Cells(xRg.Row, xTimeColumn) = Now()
            End If
        Next
    End If
End If
End Sub

nótaí: Sa chód, ciallaíonn uimhir 3 go bhfuil tú chun sonraí i gcolún C a mhodhnú, agus léiríonn 5 go ndéanfar an stampa ama a dhaonra i gcolún E. Athraigh iad le do thoil bunaithe ar do chuid riachtanas.

3. Brúigh an Eile + Q eochracha chun an Microsoft Visual Basic d’Fheidhmchláir fhuinneog.

As seo amach, nuair a athrófar sonraí i gcolún C, déanfar an stampa ama a daonra i gcealla comhfhreagracha i gcolún E mar atá thíos an pictiúr a thaispeántar.

Leid. Piocálaí Dáta. An Dáta Ionsáigh fóntais de Kutools le haghaidh Excel cabhraíonn sé leat dáta le formáid dáta sonraithe a chur isteach i gcill roghnaithe go tapa.
Íoslódáil agus bain triail as anois! (trasáil saor in aisce 30 lá)

Earraí gaolmhara:

Uirlisí Táirgiúlachta Oifige is Fearr

🤖 Kutools AI Aide: anailís sonraí a réabhlóidiú bunaithe ar: Forghníomhú Chliste   |  Gin Cód  |  Cruthaigh Foirmlí Saincheaptha  |  Anailís a dhéanamh ar Sonraí agus Cairteacha a Ghin  |  Feidhmeanna Kutools a agairt...
Gnéithe Coitianta: Faigh, Aibhsigh nó Aithnigh Dúblaigh   |  Scrios Sraitheanna Bána   |  Comhcheangail Colúin nó Cealla gan Sonraí a Chailleadh   |   Babhta gan Foirmle ...
Cuardaigh Super: Ilchritéir VLookup  |   VLookup Illuachanna  |   VLookup Trasna Ilbhileoga   |   Amharc doiléir ....
Liosta anuas Casta: Go tapa Cruthaigh Liosta Anuas   |  Liosta anuas Cleithiúnach   |  Liosta Buail Isteach Ilroghnacha ....
Bainisteoir Colún: Cuir Líon Sonrach Colún leis  |  Colúin Bog  |  Scoránaigh Stádas Infheictheachta na gColún Ceilte  |  Déan comparáid idir Raonta & Colúin ...
Gnéithe Réadmhaoin: Fócas Eangaí   |  Amharc Dearaidh   |   Barra Mór na Foirmle   |  Leabhar Oibre & Bainisteoir Bileog   |  Leabharlann Acmhainní (Uaththéacs)   |  Piocálaí Dáta   |  Comhcheangail Bileoga Oibre   |  Criptigh/Díchriptigh Cealla   |  Seol Ríomhphost trí Liosta   |  Scagaire Super   |   Scagaire Speisialta (scagaire trom/iodálach/stailc tríd...) ...
Barr 15 Uirlisí:  12 Téacs uirlisí (Cuir Téacs, Bain Carachtair,...)   |   50 + Cairt cineálacha (Cairt Gantt,...)   |   40+ Praiticiúil Foirmlí (Ríomh aois bunaithe ar lá breithe,...)   |   19 Insertion uirlisí (Cuir isteach Cód QR, Ionsáigh Pictiúr ón gCosán,...)   |   12 Tiontú uirlisí (Uimhreacha le Focail, Comhshó Airgeadra,...)   |   7 Cumaisc & Scoilt uirlisí (Sraitheanna Comhcheangail Casta, Cealla Scoilt,...)   |   ... agus eile

Supercharge Do Scileanna Excel le Kutools le haghaidh Excel, agus Éifeachtúlacht Taithí Cosúil Ná Roimhe. Kutools le haghaidh Excel Tairiscintí Níos mó ná 300 Ardghnéithe chun Táirgiúlacht a Treisiú agus Sábháil Am.  Cliceáil anseo chun an ghné is mó a theastaíonn uait a fháil ...

Tuairisc

Tugann Tab Oifige comhéadan Tabbed chuig Office, agus Déan Do Obair i bhfad Níos Éasca

  • Cumasaigh eagarthóireacht agus léamh tabbed i Word, Excel, PowerPoint, Foilsitheoir, Rochtain, Visio agus Tionscadal.
  • Oscail agus cruthaigh cáipéisí iolracha i gcluaisíní nua den fhuinneog chéanna, seachas i bhfuinneoga nua.
  • Méadaíonn do tháirgiúlacht 50%, agus laghdaíonn sé na céadta cad a tharlaíonn nuair luch duit gach lá!
Comments (60)
No ratings yet. Be the first to rate!
Paolo Iannello
Paolo Iannello
This comment was minimized by the moderator on the site
Hallo!

Der VBA-Code funktioniert wunderbar. Gibt es eine Möglichkeit den Code zu erweitern?

Jetzt gerade sie der Coade wie folgt aus:

Private Sub Worksheet_Change(ByVal Target As Range)
'Updated by Extendoffice 20180830
Dim xCellColumn As Integer
Dim xTimeColumn As Integer
Dim xRow, xCol As Integer
Dim xDPRg, xRg As Range
xCellColumn = 10
xTimeColumn = 16
xRow = Target.Row
xCol = Target.Column
If Target.Text <> "" Then
If xCol = xCellColumn Then
Cells(xRow, xTimeColumn) = Now()
Else
On Error Resume Next
Set xDPRg = Target.Dependents
For Each xRg In xDPRg
If xRg.Column = xCellColumn Then
Cells(xRg.Row, xTimeColumn) = Now()
End If
Next
End If
End If
End Sub

Allerdings möchte ich gerne, dass ein Zeitstempel auch dann ausgegeben wird, wenn in Spalte 3, 4, 6, 8, 10 oder 13 eine Änderung erfolgt. WElche Änderung spielt keine Rolle, nur das es eine gab. Geht das?

Liebe Grüße
Paolo :-)
Reply
0
0
Huzefa
Huzefa
This comment was minimized by the moderator on the site
Hi OP,

Not sure if you are still seeing this. I am trying to update this so that the formula picks up a range. I want Col E:I to be updated with a timestamp if Col J:N update to "Completed". Do you have the code for that?

Thanks,
Huzefa A.
Reply
0
0
crystal
crystal     Huzefa
This comment was minimized by the moderator on the site
Hi Huzefa,

I don't know if I understand your question clearly. The following VBA code may help. Please give it a try.
The relationship is a 1:1 mapping between the columns. With this script, when a cell in column J is updated to "Completed", the timestamp will be inserted into the corresponding cell in column E. Similarly, updates to column K will affect column F, and so on.

Private Sub Worksheet_Change(ByVal Target As Range)
'Updated by Extendoffice 20230816
    Dim IntersectRng As Range
    Dim TargetColumn As Integer

    ' Check if the changed cell is in columns J to N
    Set IntersectRng = Application.Intersect(Target, Me.Range("J:N"))

    If Not IntersectRng Is Nothing Then
        For Each cell In IntersectRng
            ' If the changed cell's value is "Completed"
            If cell.Value = "Completed" Then
                ' Calculate the target column in E:I
                TargetColumn = cell.Column - 5
                Me.Cells(cell.Row, TargetColumn).Value = Now()
            End If
        Next cell
    End If
End Sub
Reply
Report
0
0
Jon
Jon
This comment was minimized by the moderator on the site
How would I go about running this Macro in all of the sheets in my workbook? It is only working in the first sheet.
Reply
0
0
crystal
crystal     Jon
This comment was minimized by the moderator on the site
Hi Jon,
The following VBA code can help. Please give it a try.
Note: This VBA code needs to be added to the ThisWorkbook (Code) window.
https://www.extendoffice.com/images/stories/comments/comment-picture-zxm/Thisworkbook.png
Private Sub Workbook_SheetChange(ByVal Sh As Object, ByVal Target As Range)
'Updated by Extendoffice 20221208
Dim xCellColumn As Integer
Dim xTimeColumn As Integer
Dim xRow, xCol As Integer
Dim xDPRg, xRg As Range
xCellColumn = 3
xTimeColumn = 5
xRow = Target.Row
xCol = Target.Column
If Target.Text <> "" Then
    If xCol = xCellColumn Then
       Cells(xRow, xTimeColumn) = Now()
    Else
        On Error Resume Next
        Set xDPRg = Target.Dependents
        For Each xRg In xDPRg
            If xRg.Column = xCellColumn Then
                Cells(xRg.Row, xTimeColumn) = Now()
            End If
        Next
    End If
End If
End Sub
Reply
Report
0
0
Michael-1904
Michael-1904
This comment was minimized by the moderator on the site
Hallo !
Ich habe noch eine Frage zu dem oben angegebenen VBA-Code.
Bei meiner Tabelle befindet sich der Wert, für den der Zeitstempel erstellt werden soll in Spalte G.
Der Wert in G errechnet sich aus der Summe der Werte in den Spalten K:AA.
Die Werte in K:AA ergeben sich aus einem anderen Tabellenblatt, unter Benutzung der Zählenwenn-Funktion.
Wenn die Werte direkt in K:AA eingegeben werden aktualisiert sich der Zeitstempel wie gewünscht.
Wenn die Werte in K:AA durch "Zählenwenn" aus einem anderen Tabellenblatt aktualisiert werden, ändert sich der Zeitstempel nicht.

Hat jemand eine Lösung für mein Problem ?
Reply
Report
0
0
crystal
crystal     Michael-1904
This comment was minimized by the moderator on the site
Hello Michael Rasche,
The formula issue cannot be handled yet. Sorry for the inconvenience.
Reply
Report
0
0
Michael
Michael
This comment was minimized by the moderator on the site
Hallo,
ich möchte auch gerne in einer Tabelle einen Zeitstempel setzen, und bin bei der Suche auf diese Seite gestossen.
Ich habe alles wie oben beschrieben eingegeben, jetzt ergibt sich noch folgendes Problem:
Der Zeitstempel soll sich ändern, wenn sich der Wert in Spalte G ändert, der Wert in Spalte bildet sich aus der Summe mehrerer Zellen (z.B. K 150 - AA 150) in der Reihe.
Wenn ich einen neuen Wert direkt in die Zellen eingebe funktioniert das VBA.
Bei meiner Tabelle ändern sich die Werte in z.B. K 150 - AA 150 aber durch die "Zählenwenn" Funktion aus einem anderen Tabellenblatt, wenn sich dann die Summe erhöht, ändert sich der Zeitstempel nicht.
Hat jemand eine Lösung für mich ?
Reply
0
0
nate
nate
This comment was minimized by the moderator on the site
how do I add this on two columns? to have two timestamps for two column on input???
Reply
0
0
Gerald.First12
Gerald.First12
This comment was minimized by the moderator on the site
Hi, finally I found this post. Thankyou I Needed this. But can anyone help me, I want to change the code so that instead of tracking the changes on the current worksheet, I want the code to track the changes on selected Columns from other worksheet, then insert the timestamp to the current worksheet.
Reply
Report
0
0
Gerald
Gerald
This comment was minimized by the moderator on the site
Hi, finally i found this post. Thankyou I Needed this. But can anyone help me, I want to change the code so that instead of tracking the changes on the current worksheet, I want the code to track the changes on selected Columns from other worksheet, then insert the timestamp to the current worksheet.
Reply
0
0
Paul
Paul
This comment was minimized by the moderator on the site
Hi, This is great info, but I'm having problem. I would like to use for change in column A time stamp column B and change in column D with time stamp column E and change in column G with time stamp column H. I can not figure out. Help please.
Reply
0
0
Lina
Lina
This comment was minimized by the moderator on the site
Hi, Is there a chance you can help me? I have tried the VBA code for the timestamp:
Private Sub Worksheet_Change(ByVal Target As Range)
'Updated by Extendoffice 20180830
Dim xCellColumn As Integer
Dim xTimeColumn As Integer
Dim xRow, xCol As Integer
Dim xDPRg, xRg As Range
xCellColumn = 3
xTimeColumn = 5
xRow = Target.Row
xCol = Target.Column
If Target.Text <> "" Then
If xCol = xCellColumn Then
Cells(xRow, xTimeColumn) = Now()
Else
On Error Resume Next
Set xDPRg = Target.Dependents
For Each xRg In xDPRg
If xRg.Column = xCellColumn Then
Cells(xRg.Row, xTimeColumn) = Now()
End If
Next
End If
End If
End Sub

My problem is that I have to add dates in column 22 and I need the timestamp in column 21. The above code does not work in my sheet. I have tried it with timestamp functions and formulas, but it always changes it to the date when I opened the workbook.
I also tried to work with conditional formatting that the another cell changes the colour when the cell with the timestamp is not todays date, but this does not work either. Can you let me know what I do wrong?
Reply
0
0
crystal
crystal     Lina
This comment was minimized by the moderator on the site
Hi Lina,
Do you mean manually enter dates in column 22 and then populate timestamp automatically in adjacent cells in column 21?
You just need to change the column numbers in the code to get it down. If you only want to display time, replace the NOW() with Time() in the code. See the below code.

<div data-tag="code">Private Sub Worksheet_Change(ByVal Target As Range)
'Updated by Extendoffice 20201106
Dim xCellColumn As Integer
Dim xTimeColumn As Integer
Dim xRow, xCol As Integer
Dim xDPRg, xRg As Range
xCellColumn = 22
xTimeColumn = 21
xRow = Target.Row
xCol = Target.Column
If Target.Text <> "" Then
If xCol = xCellColumn Then
Cells(xRow, xTimeColumn) = Time()
Else
On Error Resume Next
Set xDPRg = Target.Dependents
For Each xRg In xDPRg
If xRg.Column = xCellColumn Then
Cells(xRg.Row, xTimeColumn) = Time()
End If
Next
End If
End If
End Sub
Reply
Report
0
0
Lina
Lina     crystal
This comment was minimized by the moderator on the site
Thank you for your response. Yes, that's what I wanted to do. I tried the above VBA code before but for some reason it did not work, but it works fine now. Thank you for your help
Reply
0
0
There are no comments posted here yet
Load More
Please leave your comments in English
Guest
Posting as Guest
×
Rate this post:
Reset
0   Characters
Suggested Locations